When it comes to polishing high-value natural quartzite — someone call “exotic granite” — every sequence, every kilogram of pressure, and every belt speed decision matters.

At Jinshan Stone Tools, we’ve re-engineered the diamond polishing process to do what others can’t: finish in a single grinding round, with minimal pressure, and zero risk to the quartz layer.

Below, we break down the numbers — and the science — behind our advantage.

1. Machine Settings That Match the Stone’s True Nature

Quartzite isn’t uniform. Medium-hard and hard slabs behave differently, and our “Jinshan”  Diamond Fickerts are designed to adapt without sacrificing efficiency.

Why this matters:

Ultra-low pressure (0-0.5 kg) is not a compromise — it’s a deliberate choice. It reduces friction heat, prevents micro-cracking, and allows the diamond matrix to cut cleanly rather than “smear” the resin or over-grind the surface.

2. The Real Game-Changer: One Grinding Round vs. Two or More

This is where the Jinshan difference becomes undeniable.

What This Means for Your Factory

Faster throughput – One round cuts production time by 50% or more compared to competitors who require 2+ rounds.

Lower operational costs – Less energy, less belt wear, and fewer man-hours per slab.

Safer for premium stone – High pressure (1‑2 kg) from other brands compresses the quartzite surface, often delaminating or fracturing the natural crystal structure. Our sub-0.5 kg approach leaves the quartz matrix intact — so the stone retains its depth, translucency, and structural strength.

Flawless final gloss – Because we never damage the surface in earlier steps, our final polish reaches 100°+ gloss (measured on a gloss meter). Competitors’ repeated grinding cycles introduce waviness, orange‑peel, and micro‑scratches that no amount of final buffing can fix — those defects are irreparable.

3. The “Epoxy → One-Step” Logic

Our process flow is deceptively simple:

Epoxy application → Single diamond grinding pass → Final polish

No intermediate re-grinding. No pressure spikes. No guesswork.

This works because our Jinshan Diamond Fickerts are formulated with a controlled resin bond that releases fresh diamonds consistently throughout the pass, combined with a cooling filler that stabilises the cutting action even at 80-90 cm/min on medium-hard stone.

4. Real-World Results

Customers switching from other brands report:

Cycle time reduction from ~45 minutes to under 20 minutes per 2-meter slab.

Reject rate cut by over 70% (fewer chipped edges, fewer burn marks).

Consistent 100-102° gloss without secondary re-polishing steps.

Final Verdict

If you’re processing natural quartzite — especially luxury slabs where every square metre carries high margin — you cannot afford a tool that over-pressures, over-grinds, or over-cycles.

Jinshan Diamond Fickert Abrasives gives you:

✅ One grinding round

✅ 0-0.5 kg pressure

✅ Full quartz integrity

✅ 100°+ gloss out of the box

Your competitors’ tools give you:

❌ Repeated cycles

❌ Higher pressure = higher risk

❌ Permanent surface damage

Ready to upgrade your quartzite line?

Contact our technical team for sample belts and a custom speed/pressure recommendation for your specific slab hardness.

Jinshan Abrasives – Polish smarter, not harder.